The Machine is to be used for flanging, inserting, encircling, cutting a planing of metal
sheets, for sealing of bottoms and inserting metal wires. Hand drive / crank.
DESCRIPTION OF THE MACHINE :
The main part of the machine is a frame, whose base is to be fixed on the working table.
The machine is to be used by hand-power through a crank. The crank moves a pair of
gears and turns both upper and lower shafts. The tools are embossed rollers fixed on both
shafts. The distance between the shafts is to be adjusted by a screw on the frame upper
An adjustable guide assures the sheet guiding. The guide holding bars are mounted into
side bearings. The machine can be equipped by additional device for cutting of circle
shapes NOR 1200/1.
TECHNICAL DATA :
|Machine lenght ||730 mm |
|Machine width ||230 mm |
|Machine height ||570 mm |
|Weight ||60 kg |
|Thickness of processed material (its strength is 400 MPa) ||1 mm |
|Axial distance between the shafts ||56 mm |
|Working height ||390 mm |
|Working depth ||280 mm |
|The upper rollers goes up ||14 mm |
|Minimal dia of the worked item ||150 mm |
Rollers are not included in unit price, they have to be extra-ordered.